Right On! Replicas

Right On Replicas, LLC Step-by-Step Review 20141003*
1990 Mustang LX 5.0 Drag Car 1:25 Scale Revell Model Kit #85-4195 Review

Review and Photos by Alan Mann

The third-generation Mustang was produced by Ford from 1978 to 1993. Built on Ford’s popular Fox platform, it evolved through a number of sub-models, trim levels, and drivetrain combinations during its production life. In fact the Mustangs of this generation are fondly called Foxes or Fox Bodies by enthusiasts. The design underwent a multi-faceted update for 1987, and the body style is grouped into two segments: the 1979-1986 cars, with their quad headlight arrangement, and the 1987-1993 cars, with their “no-grille” (aero) front fascia styling. Production ended with the introduction of the fourth-generation Mustang for the 1994 model year. Sure, racers could throw away extra money on the upgraded Mustang GT… But why? The LX coupes were lighter, faster and less expensive-the perfect drag racer. Under the hood on this light and compact car is a customized Windsor “5.0L” V-8. Although technically only 4.9L, nobody complained once they felt the power the Windsor could deliver. Put one of these on a drag line with the right set of tires and it will flat-out fly!

 

 

For the modeler: This review covers the Revell kit 85-4195 ’90 Mustang LX Drag kit. This is a 1/25 scale kit that Revell rates a Skill Level 3 for advanced builders. It comes with 139 parts molded in White, Chrome, Clear and Clear Red and has Rubber tires and Metal axle pins. This kit is considered a CONVERSION KIT by Revell as it is the same kit released recently as a 2n1 LX Stock and Police car. Revell leaves all the stock parts in this kit and just removes the Police Package parts and adds Drag Car parts so this car also is a 2n1 kit, BONUS. The motor is fairly simple but well detailed and looks good completed. You get both Stock and Drag interior parts in a multi-part interior that has a fair amount of detail. This is the typical Revell interior/engine bay set-up seen on newer kits. The suspension is very detailed and assembles nicely in this kit. You do get Drag and Stock tire options. The body is a one piece unit with only the hood being separate. I will not get into the debate of specific dimension issues that the “Purists” have brought up but overall this is THE BEST FOX on the market to date! The options to go full Stock or Drag are a nice addition. Overall dimensions are: Length: 7-1/4″, Width: 2-15/16″, Height: 2-1/16″.

 

Covered in this Review:  If you want to perfect your build; basic construction; preparing parts for better finishing; alternate assembly sequence suggestions for fit and ease of finishing; complete paint and adhesive selections and applications; test fitting; using floor polish to make spectacular window glass; making custom plates for your model; detailing the engine bay; dashboard detailing; utilizing a temporary motor mount;      making realistic tires; aligning directional tires; removing unwanted side body script; wet sanding; masking techniques; airbrush advantages; version considerations; engine construction and detailing; removing copyright scripts; suspension construction and detailing; making realistic tires; use of flocking for interior detailing; how to use Bare Metal Foil for trim; using setting solution for decal application; mold seam and ejector pin identification and repair; detailing the instrument panel; decal preparation and application; are all fully examined in this 20 page, full-color Step-by-Step review in PDF format.

100% money back guarantee!

Click the Buy Now link below to purchase the full Step-by-Step review for $2.95 USD.

Important – You MUST click on the “Return to Right on Replicas, LLC” link after you’ve made your purchase to download your review!

Right On Replicas, LLC ©2014 All rights reserved.

*All registered trademarks are the property of their respective brands.

Right On Replicas, LLC Step-by-Step Review 20141001*
Man in Space USA Manned Rocket Set 1:200 Scale AMT Model Kit #AMT700 Review

Review and Photos by Robert Byrnes

NASA’s manned space flight program started with Project Mercury, aimed at placing an astronaut in orbital flight around the earth, and recovering him safely. The first two manned Mercury missions were sub-orbital, using the Redstone ballistic missile as a launch vehicle. The Mercury capsule and escape tower added another 24 feet, bringing the entire assembly height to 84 feet. Both Mercury Redstone flights lasted only 15½ minutes, from blastoff to splashdown.

In contrast, The Saturn V, with its Apollo payload, is 365 feet tall. Physical and performance characteristics of the stages, in a mission such as the lunar trip, are as follows: the Saturn V will be able to launch into orbit more than a quarter million pounds.  The total orbiting tonnage in the lunar mission will be about 280,000 pounds.  This includes the weight of the third stage and instrument unit section.  The fully fueled and loaded Apollo Spacecraft, in its lunar mission configuration, will weigh about 95,000 pounds. This capability enabled the craft to reach the moon and back… and the rest is history.

For the Modeler: This review covers the Man in Space USA Manned Rocket Set 1:200 Scale AMT Model Kit #AMT700. The kit includes over 100 pieces molded in white styrene. AMT rates this kit a skill level 2 for the intermediate builder. I believe this kit was initially released in the early 1960s. It includes are 5 rockets from the NASA’s US manned space program: the Saturn V Saturn 1B, Mercury Redstone, Mercury Atlas and the Gemini Titan II, an illustrated cardboard gantry backdrop, retro packaging, expanded waterslide decals. These kits follow the progress of the U.S. Manned Space program from 1961-1969. The five rocket models are accurate to the historic spacecraft. It includes an LEM and service modules for both Saturn 1B and Saturn V and illustrated instructions. Finished dimension of the backdrop gantry is 25” tall. Remember… keep learning and have fun!

Covered in this Review:  If you want to perfect your build, this review shows you how through; basic construction; preparing parts for better finishing; alternate assembly sequence suggestions for fit and ease of finishing; complete paint and adhesive selections and applications; test fitting; mold seam identification and repair; where not to use glue;  a discussion regarding decal authentication; clamping methods; using Alclad to simulate chromed parts; repairing sink marks; using metal foil to simulate authentic surfaces; using Alclad paint to add realism; authentic paint schema; using decal setting solutions to aid in adhesion; scratch building LEM landing gear; expanded 1:1 vehicle specifications; masking methods; using floor polish for good decal adhesion; platform and gantry construction; are all fully examined in this extensive  42 page, full-color Step-by-Step 2 part review in PDF format.

100% money back guarantee!

Click the Buy Now link below to purchase the full Step-by-Step review for $4.95 USD.

Important – You MUST click on the “Return to Right on Replicas, LLC” link after you’ve made your purchase to download your review!

Right On Replicas, LLC ©2014 All rights reserved.
*All registered trademarks are the property of their respective brands.

Right On Replicas, LLC Step-by-Step Review 20140929*
Datsun Off-Road Pickup 1:24 Scale Revell Model Kit #85-4321

Review and Photos by Tom Schaefer

 Looking every bit like a miniature version of a classic monster truck these little workhorse pickups were often fitted with big tires and heavy duty suspensions for show and go. As Revell puts it, “Nissan has made solid pickups since 1934, but it wasn’t until 1958 that they began selling them in American under the Datsun name. As soon as these trucks made their appearance they left an indelible mark on the American truck market. Their trucks were notably smaller, more efficient and less polluting than domestically produced units for little reduction in horsepower. The model 720 was equipped with an overhead-cam 103 horsepower NPS-Z 2.4 liter engine.”

 

 

For the modeler: This review covers the “Trucks” Series Datsun Off-Road 4X4 Pickup 1:24 Scale Revell Model Kit #85-4321. The Datsun pick-up has been a staple in the Revell line up for over 25 years, making it’s reappearance this year in Revell’s “Trucks” line. This time around it comes as a ” skill level 2″ (which is a high rating considering the low parts count) glue together model instead of a SnapTite, although everything STILL SNAPS together(?). It’s made up of 50 parts molded in white, with clear windows and headlights, generous chrome, and black vinyl tires. The truck builds up into a stock 720 Datsun shortbed pickup, with some mild 4×4 addon’s. It’s a simple kit without a lot of parts but that makes it an excellent kit for the novice builder. The hardest part about construction is the decals which can take a little patience. Still, it makes an nice display model for your Off-Roader shelf. Kit features an opening hood, 4-cylinder engine, bumpers and decals.  The finished dimensions are: Length: 7-3/8″, Width: 3″, Height: 3-1/8.”

 

Covered in this Review:  If you want to perfect your build; basic construction; preparing parts for a better finish; alternate assembly sequence suggestions for fit and ease of finishing; complete paint and adhesive selections and applications; test fitting; modifying the chassis for a better fit; engine construction and detailing; suspension construction; making realistic tires; interior detailing; detailing the chassis; how to detail the interior; engine bay touches; modifying the fender flares for realism; mold seam repair; detailing the instrument panel; decal preparation and application; are all fully examined in this 12 page, full-color Step-by-Step review in PDF format.

100% money back guarantee!

Click the Buy Now link below to purchase the full Step-by-Step review for $2.95 USD.

Important – You MUST click on the “Return to Right on Replicas, LLC” link after you’ve made your purchase to download your review!

Right On Replicas, LLC ©2014 All rights reserved.
*All registered trademarks are the property of their respective brands.